INVESTIGATOR 563

Merry Christmas one and all. Hope to get on the water if this rotten wind will die down a bit, even if it’s only to give the new fishing rods their first run.
Cheers

https://www.facebook.com/marketplace/it ... tid=dXMIcH
Includes new Tohatsu Sail Pro
$8000 the lot or $6000 without the motor or $2000 for the motor only

Finally ! I thought it would take 6 months and the big launch day came today after only three and a half years of hard work. WOO HOO. Now, to start sorting out the rigging. As you can see in the second photo, I needed to use my tow bar extension as well as the tilt function of the trailer, even thou...

Beautiful job Andrew. Well done

Good Job Andrew, keep the progress photos coming mate. Cheers

Hi Ian. Don’t hesitate to get in touch if you need to mate. Good luck with it . If you send me a PM, I will send you my phone number. Cheers

Hi ian, have a look at these mate. received_138534741470841.jpeg shows how flogged out my holes in the centreboard case was. you can see here the recess in the fibreglass where originally there was a rubber seal fitted in there to try and seal around the bolt. they were fitted from inside of the cav...

Hi Ian, you are doing a great job. Just remember that the thing that wears out the bushes around the pivot bolt and the holes in the sides of the centreboard case is sideways movement of the centreboard port to starboard, so it is vital that those thrust washers each side of the centreboard are larg...

Great job Ian. Well done. Should outlast the rest of the boat. Cheers

Thanks Ozzie, yes I will have to lower at least the back of the bunks if not both front and back as there is not much " swivel " in them but that should not be too much of a hassle.
cheers